Have more questions? Submit a request

Vestel device Provisioning

If necessary, you can access device operating system to perform OS factory reset. To access this menu on your remote control press MENU followed by code 4725. Keep in mind this is different from Android Factory reset which can be done through Android menu subsection, accessible through MENU button on your RC.   

Factory reset of OS

  1. Press MENU followed by code 4725vestel_provisioning_3.jpg
  2. Select diagnosticsvestel_provisioning_4.jpg

Initial setup

  1. Select language
  2. Select country
  3. Select time
  4. Select Continue
  5. Select Home App -> App Launcher
  6. Wait until the device is ready to be operated
  7. Connect USB flash drive with signageOS application
  8. Once the USB flash drive is connected, default file system will be displayed
  9. Back out and navigate to File Browser from Android menuvestel_provisioning_1.jpg
  10. Select signageOS application and install all necessary files
  11. Display should now show the Verification Hash and be ready for registration in Box

Next steps

  Learn how to add new device via Box

Continue here

  Learn how to add new device via REST API!

Continue here

Common Troubleshooting

  • Display reports information about internet being not available, in this case check if the device reports internet connection through Android settings menu, native OS may display this information incorrectlyvestel_provisioning_2.jpg
Was this article helpful?
0 out of 0 found this helpful
Share